MACC Series – Electric Actuators

The most compact Max-Air actuator on the market today. This little MACC powerhouse, roughly the size of a soda can, is designed to fit into the smallest of locations, generating 160 in-lbs of torque, comes standard with F03/F04/F05 mounting, auxiliary switches, manual override, visual indication, extended leads, and available in a variety of voltage options.

Features and Benefits

COMPACT DESIGN

This actuator generates 160 in–lbs of output torque (or 80 in–lbs in the quick acting unit) in roughly the size of a soda can.

VISUAL INDICATION

Unit comes standard with a visual indicator on top of the unit, by way of a sight glass, showing the percentage of open to closed, with indication of full open and full closed positions.

VOLTAGE / POWER OPTIONS

This unit is available as a 24VAC or VDC unit, 110VAC and 220VAC, with very low amp draw.  220VAC requires 0.15A, 110VAC requires 0.28A, and the 24VAC/24VDC unit requires only 1.10A.  AC units @ 6W, DC units @ 8W.

ISO MOUNTING PATTERNS

The unit comes standard with F03, F04, and F05 mounting flanges along with a 9 or 11mm square output drive.

SWITCHES

Available with or without auxiliary signaling switches.

THERMAL PROTECTION

The MACC is fitted, as a standard feature, with thermal protection; the design incorporates an auto-reset feature.

TEMPERATURE RANGE

MACC units come standard with an extended temperature range, operating from -22F to 140F.

HOUSING MATERIAL & WEIGHT

Die-casting aluminum alloy, robust in a very tight package for long service life, and weighing in at only 2.65 lbs. (1.2 Kg).

INGRESS PROTECTION

Unit rated to IP68 (completely protected against dust and good for general submersion in water)

MANUAL OVERRIDE

Manual override capability is standard in case of power failure.

FLYING LEADS

The flying leads on the MACC actuators offer easy wiring options with quick assembly. Three meter leads are standard but longer lengths are available by special order to accommodate any custom project.

QUICK ACTING

The MACC units is also available, by special order, in quick acting configuration.  The torque output is reduced by 50%, but the rotation time is reduced by half (12 seconds reduced to 6 seconds).