Case Studies | Applicazioni

Non categorizzato

Manual Resilient Butterfly Valve w/ 5ft Stem Extension

Sometimes a stem extension is needed when manually operating the valve is too difficult to reach or dangerous. This 5ft Stem Extension was exactly what the customer needed. Next time you have a difficult to reach manual butterfly valve application, give us a call!

Max-Air Technologyottobre 1, 2021

Non categorizzato

ENP (Electroless Nickel Infused) Actuators w/ Resilient Butterfly Valves

Our ENP (Electroless Nickel Infused) Actuators provide a uniformly thick coating with essentially no porosity and a reasonably high hardness. The coating is pure, tough, hard, and resistant to many types of corrosion media. The coating will provide enhanced corrosion protection in very acidic environments…

Max-Air Technologyottobre 1, 2021

Non categorizzato

Dry Media Resilient Butterfly Valve Assemblies

Our Delta T Valves and Max-Air Actuators are setup up perfectly for direct mounting, but sometimes, when installed into applications with dry media, the actuator will need to be upsized. When this happens, we use our cast MAB Stainless Steel Brackets and custom machined couplers to mount.

Max-Air Technologyottobre 1, 2021

Non categorizzato

One Stop Shop for Stainless Automation Packages

Our stainless automation offering is second to none! All of the items above the valves in the photos below are Max-Air core product and stocked. Not pictured are our stainless positioners and tubing. Next time you have a need for stainless, send us an inquiry!

Max-Air Technologyottobre 1, 2021

Non categorizzato

Quality Assurance

Quality Assurance is being done on this assembly before shipping! Each order is tested at multiple phases during the fulfillment process.

Max-Air Technologyottobre 1, 2021

Non categorizzato

Rack & Pinion Actuators Built in the USA

Our North American Team is hard at work building these MT16 Rack & Pinion Actuators for stock. The will be assembled, tested, and shelved awaiting your orders!

Max-Air Technologyottobre 1, 2021

Non categorizzato

Class #150 High Performance Butterfly Valve w/ Direct Mount ME Series Electric Actuator

Check out our Delta T Direct Mount Class 150 High Performance Butterfly Valve with ME Series Electric Actuator! This is one of 5 shipping today on the same pallet. Turn around is quick on stock products like these. Send us your urgent inquiries! We appreciate…

Max-Air Technologyagosto 23, 2021

Non categorizzato

Manual (Handle Operated) Butterfly Valve w/ Limit Switch

When providing our  Delta T Manual Butterflies Valves, we often hear of customers wanting Open/Closed feedback. When this happens we provide the following solution. Our custom bracket and coupler ensure a sturdy fit for our Limit Switches.

Max-Air Technologyagosto 23, 2021

Non categorizzato

Automated Resilient Butterfly Valve w/ Positioner

We have everything needed to automate your valves! Our complete offering of valve automation products like brackets, couplers, actuators, positioners, tubing options, and air filter regulators ensures you have a clean, tested, and reliable assembly for installation.

Max-Air Technologyagosto 23, 2021

Non categorizzato

LockMesh® Coated Actuator After 2 Years of Service

Recently, we had the opportunity to photograph one of our LockMesh® Coated Actuators after 2 years of service. This unit comes from a prominent salt mining and processing company. They have had great success using our LockMesh® Coated Actuators. With several hundred units installed, they…

Max-Air Technologyagosto 23, 2021

Non categorizzato

Handle Operated Ball Valve w/ Limit Switch

This manually operated Sesto 2-Pc Flanged Ball Valve has a custom bracket and our 45 Series Limit Switch on top. This feedback makes position indication for manual valves possible, simple, and reliable!

Max-Air Technologyagosto 23, 2021

Non categorizzato

Pump Flow Reversal w/ Unique Assembly of Valves & Fittings

This assembly of valves and fittings is being utilized by a barge cleaning company on the Mississippi river to reverse flow directions on a pump system so they can switch from ballasting to ballast discharging with the push of a button rather than the old…

Max-Air Technologyagosto 23, 2021

Non categorizzato

Fast Acting Butterfly Valve Repeat Order

More Fast Acting Delta T Butterfly Valve Assemblies shipping out today! This is a repeat order for us. The customer is very happy with the final product and reorders whenever they set up a new system. The hole on top allows for faster close and…

Max-Air Technologyagosto 23, 2021

Non categorizzato

Compact 3-Position Control Box

Max-Air introduces our compact control box for use with 3P Series 180° 3-position pneumatic actuators. This device simplifies air connections and field wiring into a single air supply port and 3 signal wires (+ 1 neutral/ negative). All electrical connections and operating logic are handled…

Max-Air Technologyagosto 23, 2021

Non categorizzato

Triple Offset Butterfly Valves

Our Triple Offset 6" & 12" Class 150 Delta T Valves are automated via two MT Series Rack & Pinion Actuators with a positioner and air filter regulator. The stem extensions help when a pipeline needs insulation. Complete assemblies like these are available for any…

Max-Air Technologyagosto 23, 2021

Non categorizzato

Large Scotch Yoke Actuators

These large scotch yokes measured over 10ft long, 3ft tall, and 3,300lbs. The shipping on larger items like these always bring about logistical hurdles, but our talented team is ready and able to handle them all!

Max-Air Technologyagosto 23, 2021

Non categorizzato

Tee Assemblies as a Substitute for 3-Way Ball Valves

Pictured below are two Tee Assemblies. One of our MT Rack & Pinion Actuators is used to turn two valves on opposite sides of the Iron Tee, via Linkage, directing flow. With a setup like this, one can achieve the benefits of a 3-way valve…

Max-Air Technologygiugno 14, 2021

Non categorizzato

Stainless Steel Bottom Entry L-Port Ball Valve Assembly

This Stainless Steel Bottom Entry L-Port Ball Valve is being automated with our UT 180° Center Return Rack & Pinion Actuator. We have a robust offering of 180° actuation options. Next time you have an application like this, give us a call!

Max-Air Technologygiugno 14, 2021

Non categorizzato

480V 3 Phase Electric Actuator w/ Local On/Off Control

These Delta T Resilient Butterfly Valves are automated by our ME Series Electric Actuator. The 480V 3 phase with local on/off control actuator is mounted directly to our valve, which eliminates the need for a bracket and coupler.

Max-Air Technologygiugno 14, 2021

Non categorizzato

Demanding Situations, Heavy Duty Scotch Yokes

Our Heavy Duty Scotch Yokes are ready for the most demanding of situations! There are two different configurations of Scotch Yokes below. One is setup with a positioner and Stainless Tubing. The other has a limit switch and solenoid with termination.

Max-Air Technologygiugno 14, 2021

Non categorizzato

Rack & Pinion Actuator w/ Custom Painted End Caps

These MT Series Rack & Pinion Actuators with yellow end caps were produced per a customer's request. We provide epoxy painting services in any color! Is color a factor for you or your client? Just give us an RAL #, and we can make it…

Max-Air Technologygiugno 7, 2021

Non categorizzato

Large Diameter Resilient Butterfly Valve Assemblies

With our Delta T Valves, Resilient Seated Butterfly Valves, you can get the complete valve automation package. These assemblies were picked, assembled, tested, and shipped ahead of their due date on an expedite for a customer in need! Our shop has been working non-stop around…

Max-Air Technologygiugno 7, 2021

Non categorizzato

Fast Acting 180° Rack & Pinion Actuator

Fast Acting 180° Rack & Pinion Actuator shipping! This is going into a larger setup to be installed at a NASA facility. The additional holes allow for air to escape the actuator quicker than usual. The customer will be finishing the automation on their end.

Max-Air Technologygiugno 4, 2021

Non categorizzato

ENP Spring Return Actuators w/ 3-PC Class 800 Ball Valves

Even more Electroless Nickel Plated Rack & Pinion Actuators going out! This is only a small sampling of a large order of Spring Return 3-PC Class 800 assemblies. These are ready for some pretty demanding conditions. If you need corrosion resistance, give us a call!…

Max-Air Technologygiugno 4, 2021

Non categorizzato

ENP Actuator for Corrosion Protection

There are a lot of ENP Coated Rack & Pinion Actuators going out this week! The coating will provide enhanced corrosion protection in very acidic environments but will not withstand attack from strong alkaline media. Also suitable for low to medium concentrations of caustic washdown…

Max-Air Technologygiugno 4, 2021

Non categorizzato

Oxygen Cleaning & Butterfly Valves

Theses manual and gear operated Delta T Valves have been oxygen cleaned and bagged per a customer request. The valves are treated with care throughout the entire order fulfillment process. Please do not hesitate to ask us about oxygen cleaning should you have an application that needs…

Max-Air Technologymaggio 28, 2021

Non categorizzato

Stainless Steel Actuators That Operate on Seawater

One of the unique uses we have found for our SS Series Stainless Steel Actuators, is the ability to run them using seawater as the operating media. With some slight in-house modification, Stainless Tubing, and our custom machined Stainless Steel High Capacity Flow Block, these…

Max-Air Technologymaggio 25, 2021

Non categorizzato

Compact Rack & Pinion Actuators for 3/4″ 3-Way Ball Valves

Our small but mighty MT12 DA Rack & Pinions on some 3/4" 3-way ball valves. This is a release of a large repeat order. The automation is simple and quick thanks to our MT Series being ISO direct mount!

Max-Air Technologymaggio 19, 2021

Non categorizzato

Epoxy Coating in Any Color

The standard for our MT Series Rack and Pinion Actuators is anodized aluminum and epoxy coated end caps. That said, we have a lot of customers that request epoxy coating for an extra layer of protection. We can provide the coating in any color requested.

Max-Air Technologymaggio 19, 2021

Non categorizzato

Gear Operated Resilient Seated Butterfly Valves w/ 50ft of Chainwheel

These 8" Delta T Valves Resilient Butterflies are mounted to our GO Series Gear Operator with a chainwheel and 50ft of chain. Max-Air offers Manual Operators as well as Manual Override options.

Max-Air Technologymaggio 19, 2021

Non categorizzato

Teflon Lined Ball Valve Assemblies w/ Low Temp Epoxy Coated Rack & Pinion Actuators

These teflon lined ball valve assemblies are headed up north. With our Epoxy Coated, Low Temp, MT Series Rack & Pinion Actuators, they are ready for the cold weather conditions! Max-Air is willing and able to work with your supplied parts. We can even provide…

Max-Air Technologymaggio 19, 2021

Non categorizzato

12″ High Performance Butterfly Valve with 3ft Stem Extension

This 3ft stem extension on this Delta T Valves 12" Class 150 Double Offset ends up being 40 inches off the mounting pad of the valve when including the bracket! The assembly also uses one of our largest rack and pinion sizes.

Max-Air Technologymaggio 19, 2021

Non categorizzato

Powder Coated Couplers & Innovation

Our investments into machining and powder coating have gotten more and more efficient this past year. Each one of these bars holds 20 couplers. This allows us to powder coat large quantities with exceptional speed. Innovation is in our veins!

Max-Air Technologymaggio 19, 2021

Non categorizzato

100 Automated 3-PC 2000 WOG (Class 800) Ball Valves

This is just a sample of an order that included 100 Automated 3-PC 2000 WOG (Class 800) Sesto Valves. Our actuator and this valve are a perfect direct mount combo. Assemblies like this reduce overall, size, weight, and cost by not requiring a bracket. Give…

Max-Air Technologymaggio 19, 2021

Non categorizzato

Stainless 4″ 3-Way Sanitary Assembly

This all stainless 4" 3-way sanitary assembly is quite a sight to behold! Our SS Series Rack & Pinion Actuators works perfect for applications in the sanitary market.

Max-Air Technologymaggio 19, 2021

Non categorizzato

Large Diameter 3-Way Tee Assembly

This 8" Delta T Valves BFV Iron Tee Assembly shipped yesterday! Assemblies like this are an excellent, cost-effective solution for larger diameter 3-Way applications.

Max-Air Technologymaggio 19, 2021

Non categorizzato

The New AG Series! A High Performance, Italian Scotch Yoke

Something we've been working on for a while is now coming to fruition... These scotch yoke actuators where designed and manufactured in our Italian factory! There has been a need in the market for a scotch yoke actuator that provides the highest and most critical…

Max-Air Technologymaggio 18, 2021

Non categorizzato

Explosion Proof Termination & Declutchable Gear Override

This large rack and pinion actuator is shipping today with a limit switch, solenoid, explosion proof termination, and a declutchable gear operator for manual override. We provide assemblies like this all the time for customers that supply their own valves or are replacing existing automation.

Max-Air Technologymaggio 18, 2021

Non categorizzato

180° Actuator Modified to be 120° w/ Extended Travel Stops

These UT 180° Rack & Pinion Actuators are being modified with extended travel stops to turn 120°. Actuators setup up like this are often used in 3-Way Wye Style Valves. These types of valves can help prevent pressure loss due to their 120° angles between…

Max-Air Technologymaggio 18, 2021

Non categorizzato

Automated Class 150 Flanged Ball Valves

These Class 150 Flanged Ball Valve Assemblies shipped the other day. The largest diameter shown is a 4". Max-Air provided the complete package for this order. Let Max-Air quote your next project!

Max-Air Technologyfebbraio 15, 2021

Non categorizzato

Tandem Delta T Butterfly Valve Assemblies

More Tandem Assemblies going out today using our Delta T Butterfly Valves! The valves on bottom direct mount and the valves on top use our MAB Cast Brackets. The butterfly valves with the grey discs are BUNA Seats and Undercut Nylon 11 Coated Ductile Iron…

Max-Air Technologyfebbraio 15, 2021

Non categorizzato

3-Way Floating Ball Valve w/ Explosion Proof Termination

This entire assembly was provided by brands and members of the Max-Air Group of Companies. Sesto Valves provided the Metal Seated, Stainless Steel, Class 300, L-Port, 3-Way Floating Ball Valve, and Max-Air Technology provided everything from the top of the valves up. Including the explosion proof termination.

Max-Air Technologyfebbraio 15, 2021

Non categorizzato

15 Year Old Actuators Being Rebuilt For Another Round of Service

These actuators have come back to us after just over 15 years of service! They are covered in concrete due to their installation environment. Our customer sent them in for some new grease, o-rings, and skates. Once refreshed, they will be going right back into…

Max-Air Technologyfebbraio 15, 2021

Non categorizzato

Epoxy Coated Rack & Pinion Actuators w/ Positioner and Tubing

Our shop is going full speed ahead on shipping today! These Epoxy Coated MT Series Rack & Pinions w/ Positioners are being tested now. Many of our customers have us handle the automation and position indication, while they provide the valve.

Max-Air Technologyfebbraio 15, 2021

Non categorizzato

4-Way Bottom Entry Diverter Valve w/ 180° Actuator & Positioner

The assembly below is an automated 4-way bottom entry diverter valve w/ 180° actuator and positioner. It is being calibrated to achieve 3 positions. Our extensive range of special rotation rack & pinion actuators provides flexible solutions for our customers.

Max-Air Technologyfebbraio 15, 2021

Non categorizzato

Corrosion Resistant LockMesh® Coated Actuators

Take a look at these salt covered, LockMesh® Coated Rack & Pinion Actuators! Our proprietary LockMesh® coating is perfect for extremely corrosive environments, such as salt air, caustic wash down, and acid production/handling. It is also a fraction of the expense of similar stainless steel…

Max-Air Technologyfebbraio 15, 2021

Non categorizzato

Instrumentation Assembly w/ Custom Panel Mount Bracket

Max-Air is proud to support our partners in the instrumentation industry with these compact automated solutions. The assemblies below sport our MT Series Rack & Pinion, Custom Machined Bracket/Coupler, and Custom Panel Mount Bracket.

Max-Air Technologygennaio 7, 2021

Non categorizzato

Engineered Polymer Actuators & Instrumentation Valves

This option we have for instrumentation valves is our lightweight Engineered Polymer Actuators! These come in Technopolymer and Glass-Reinforced Polypropylene (UT Tech Series and GP Series). Another benefit is that these actuators can handle some extreme environments. The UT Tech (pictured below) is rated for…

Max-Air Technologygennaio 7, 2021

Non categorizzato

Stainless Steel Rack & Pinion Actuators in All Sizes!

Need Stainless Steel (AISI 316) Rack & Pinion Actuators? We've got you covered! Our SS Series Actuators come in a variety of sizes and configurations. We also offer a mirror polish finish as an option for sanitary applications.

Max-Air Technologygennaio 7, 2021

Non categorizzato

Shipping Up Until the Last Minute

We are working up to the last minute to get your orders shipped before the New Year! We are closed New Years Eve and New Years Day. Let us know if there is anything you need before then!

Max-Air Technologydicembre 30, 2020

Non categorizzato

Control Valve Assembly w/ Customer Supplied Material

We've got a ton of assemblies going out today. Check out this assembly we did with customer supplied material! This control valve package is being tested now and will ship before the New Year.

Max-Air Technologydicembre 30, 2020

Non categorizzato

Tandem 1/2″ 2000 WOG (Class 800) Fire-Safe 3-PC Ball Valve Assembly

Another Tandem Assembly is shipping today! Assemblies like this are always exciting for our team. These two 1/2" 3-PC 2000 WOG (Class 800) Fire-Safe Ball Valves are automated by a single MT16 Double Acting Rack and Pinion Actuator. They are mounted with our MAB Brackets and…

Max-Air Technologyottobre 26, 2020

Non categorizzato

14” Class 150, Nickel Aluminum Bronze, Double Offset Butterfly Valves w/ Gear Operator

Repeat order of some Delta T Valves 14” Class 150, Double Offset Butterfly Valves with Nickel Aluminum Bronze (C95800) body/disc, RTFE seats, & Monel® K-500 stem. Both are manually operated with a gear operator for a seawater application.

Max-Air Technologyottobre 26, 2020

Non categorizzato

Double Offset Butterfly Valve w/ HD Series Scotch Yoke, Quick Exhaust for Fast Close, & Pressure Relief Valve (PRV)

This high performance bfv assembly automated with our HD Series actuator includes a quick exhaust (for fast close) and a pressure relief valve (PRV) to protect the actuator & solenoid in case of a pressure spike.

Max-Air Technologyottobre 26, 2020

Non categorizzato

AE Series Actuator w/ optional Aluminum Lid & High Visibility Beacon

These assemblies for our Delta T Butterfly Valves showcase our AE Series Actuator with optional Aluminum Lid* & High Visibility Beacon! An Aluminum Lid* is ideal for outdoor use and provides increased impact resistance when compared to the standard polycarbonate lid. (*Note: Available in select…

Max-Air Technologyottobre 26, 2020

Non categorizzato

Complete Stainless Assemblies

Check out these all stainless assemblies! We provided the SS Series Actuators that fit perfectly with these direct mount 1" & 6" Class 150 Flanged Ball Valves. Whatever the size or application, Max-Air can provide a solution.

Max-Air Technologyottobre 26, 2020

Non categorizzato

Epoxy Coated MT Actuator w/ MS41 Technopolymer Limit Switch Box & T4X Termination

These corrosion resistant actuator packages really stand out! From the epoxy coated MT Actuator, to the MS41 Technopolymer Limit Switch Box with T4X Termination, Max-Air is ready to fulfill all of your actuation needs!

Max-Air Technologyottobre 26, 2020

Non categorizzato

The Same 3″ Flanged Class 150 Carbon Steel Ball Valve, Configured 3 Different Ways

The same 3" Flanged Class 150 Carbon Steel Ball Valve configured 3 different ways! This order required two actuated packages, one on/off and one modulating. We also shipped a gear operated version. Max-Air provided everything needed for these assemblies in addition to the assembly.

Max-Air Technologyottobre 26, 2020

Non categorizzato

Modulating Delta T Diffuser-Plate Control Butterfly Valve Assembly

Assemblies going out today with our new Delta T Diffuser-Plate C Series Butterfly Valve! Compared to the industry standard Globe Valve, this design has improved control at lower flow rates, better range-ability, higher flow capacity, reduced noise and vibration, and all at a lower cost.…

Max-Air Technologyluglio 15, 2020

Non categorizzato

Custom Machined Couplers for Valve & Actuator

Our newest Milling Machine and software has exponentially increased our custom mounting capabilities and greatly decreased our lead times. This project required over 60 couplers which were completed in record time. Max-Air Technology is your one stop shop for automated packages!

Max-Air Technologyluglio 15, 2020

Non categorizzato

HAZLOC Valve Assemblies Using Only Max-Air Manufactured Products

Max-Air manufactures everything that was needed to assemble these 4 HAZLOC valve assemblies including our Direct Mount 2" Delta T High Performance Butterfly Valves, MS48 Limit Switches, SV91 Solenoid Valves, and Explosion Proof Termination. We are thankful to our wonderful network of distribution partners who…

Max-Air Technologyluglio 6, 2020

Non categorizzato

Wye Flanged Lateral w/ 3-Way Linkage

In addition to our actuated Tee program, Max Air can also automate other fitting configurations such the Wye style flanged lateral shown in these images. Using the same basic linkage style, the two legs of the fitting can be simultaneously operated for efficient mixing or…

Max-Air Technologygiugno 29, 2020

Non categorizzato

Scotch Yoke w/ Hydraulic Manual Override System

In real life scenarios with critical service valves, there are situations such as the loss of air or loss of power where a valve must be forced into a position other than its current position. In those critical times, the right accessories on an actuator…

Max-Air Technologygiugno 18, 2020

Non categorizzato

1/2″ Modulating Flanged Ball Valve Assembly w/ Air Filter Regulator & Brass Muffler

This 1/2" Modulating Flanged Ball Valve Assembly is shipping out today! Notice the Air Filter Regulator and Brass Muffler. The regulator ensures clean consistent air is supplied to the actuator, and the muffler reduces operation noise from exhausting air. As an added bonus, the brass…

Max-Air Technologymaggio 26, 2020

Non categorizzato

Complex Electrical Termination w/ Customized Junction Box

This customer requirement for an actuator package operated by a dual coil solenoid valve and with hermetically sealed switches for position indication led to a complex electrical termination. It could only be accomplished at the actuator through the use of a customized junction box. Max…

Max-Air Technologymarzo 27, 2020

Non categorizzato

Fire Safe Assembly w/ Explosion Proof Termination

Pictured here is our Delta T Brand 10" Fire Safe Class 150 Double Offset BFV mounted to a MT71 Rack and Pinion with Explosion Proof Termination. Contact us with your next Fire Safe Application!

Max-Air Technologymarzo 6, 2020

Non categorizzato

3/4″ Modulating 30° V-Ball Assemblies

These 3/4" Modulating V-Ball Assemblies are going out today! They include our ME Series Actuator and a (2000 WOG) 3-PC Ball Valve w/ a 30° V-Ball.

Max-Air Technologyfebbraio 28, 2020

Non categorizzato

Modulating, Electric 15° V-Ball Assemblies

These modulating AE Series electric actuators are going out mounted to Sesto M32 3-piece valves with 15° v-balls. (Also note our heat dissipating couplers and MAB cast stainless brackets.) Need greater control over your flow? Max-Air has the capability to offer complete packages in house!

Max-Air Technologyfebbraio 6, 2020

Non categorizzato

DeltaT Double Offset Valves, Direct Mounted to Low Temp Rack & Pinion Actuators

Today, we have some of our DeltaT Double Offset Valves going out direct mounted to our MT46 Low Temp Actuators. These assemblies were put together and tested in almost no time at all. Send us your inquiries today!

Max-Air Technologyfebbraio 5, 2020

Non categorizzato

MT04 Assembly vs MT66 Size Comparison

Take a look at this size comparison! The actuator at the center of this all is our MT66 DA surrounded by a sea of MT04 DAs. The double acting torques at 80 psi are 12,000 in-lbs and 80 in-lbs respectively. We offer DA rack and…

Max-Air Technologygennaio 30, 2020

Non categorizzato

Red Epoxy Coated UT 180° Actuators

At Max-Air, we pride ourselves on the level of customization we can achieve. Not only do we provide perfectly taylored solutions that meet technical requirements, but we can also provide them in whatever color you need! Pictured here are a few red epoxy coated UT…

Max-Air Technologygennaio 14, 2020

Non categorizzato

Panel Mount Bracket Instrumentation Assemblies

Check out these assemblies complete with panel mount brackets! This is a simple solution for any of your instrumentation automation needs. Contact us today with your toughest application, because at Max-Air Technology, we love solving problems with uniquely engineered solutions.

Max-Air Technologygennaio 3, 2020

Non categorizzato

Corrosion Resistance at Its Finest, Complete w/ Stainless Positioner

We have had a lot of stainless assemblies go out in the last month. Here is another assembly shipping complete with stainless positioner. This is corrosion resistance at its finest. Call us for help with your application today!

Max-Air Technologydicembre 26, 2019

Non categorizzato

Modular Scotch Yoke Design & Hydraulic Hand-Pump Overrides

These freshly painted Scotch Yoke Actuator Components are a sight to behold. Our modular design allows us to keep a healthy stock of components and then assemble them to fit your exact application. Pictured here, we even offer hydraulic hand-pump override options.

Max-Air Technologydicembre 26, 2019

Non categorizzato

Fast Acting, Electroless Nickel Plated Actuator

Pictured here is our MT Series actuator with Electroless Nickel Plating. The ENP finish is perfect for acidic environments. The actuator was drilled, tapped, and tubed with corrosion resistant stainless steel tubing for fast acting service.

Max-Air Technologynovembre 22, 2019

Non categorizzato

LockMesh Control Valve Assembly

This control valve assembly is complete with positioner, stainless tubing, and air filter regulator. The aluminum rack and pinion actuator has been upgraded with LockMesh coating, which provides similar corrosion resistance to stainless. It does this while reducing cost and weight. This is an excellent…

Max-Air Technologynovembre 5, 2019

Non categorizzato

Professional, In-House Powder Coating Services

Max-Air Technology provides a plethora of options when it comes to special coatings and finishes. The newest addition to our offering is our in-house powder coating service. Pictured here is a custom machined coupler that was powder coated upon completion. The powder is applied in…

Max-Air Technologyottobre 22, 2019

Non categorizzato

Intrinsically Safe, 3-Position, T-Port Ball Valve Assembly

Our customer required a valve assembly utilizing T-port ball valve needing 3-position control, all within an intrinsically safe operating area. Max-Air selected the switch box, solenoid valve, sanitary style T-port ball valve and our own 180 degree actuator in order to satisfy this users unique…

Max-Air Technologyottobre 22, 2019

Non categorizzato

Sturdy, Professional Packaging & Direct Line Shipping

Max-Air prides itself on being able to deliver working, intact products that are free of damage due to improper care while shipping. Keeping the 1/2” stainless tubing on these scotch yoke actuators free from transit abuse was critical. If the tubing was damaged during handling,…

Max-Air Technologyottobre 8, 2019

Non categorizzato

DA Scotch Yoke to Fail in Place on Loss of Air or Electricity

Double acting HD Series scotch yoke actuators accessorized with dual coil solenoid valve, 1/2" stainless tubing, and mounting bracket. These will fail in place on loss of air or electricity. In the background of the photo below, we also have 28 epoxy coated MT Series…

Max-Air Technologysettembre 27, 2019

Non categorizzato

Electrically Actuated, Butterfly Valve Tee Assembly w/ Chainwheel & Remote

This electrically actuated, butterfly valve tee assembly will be installed 40 ft off the ground for a ventilation application. The customer requested a remotely mounted local control station at ground level for easy operation by a plant employee. We also provided a chain wheel operator…

Max-Air Technologysettembre 18, 2019

Non categorizzato

Explosion Proof Actuator Assembly & Termination.

Max-Air Technology offers a simple and convenient way to minimize installation time by using our termination and tubing services. Why terminate wiring at two locations instead of one? Max-Air can pre-wire and terminate solenoid valve coils into our limit switch boxes, providing a single access…

Max-Air Technologysettembre 17, 2019

Non categorizzato

Applying an Industrial Epoxy to Scotch Yoke Cylinder

Industrial Epoxy is durable, non-toxic, easy to maintain, weather resistant, impact resistant, & chemical resistant. All of these characteristics make it a perfect match for our HD & HHD Series Scotch Yoke Actuators. While the video is a complete painting of the cylinder, it does…

Max-Air Technologysettembre 17, 2019

Non categorizzato

Pneumatic Actuator w/ Stainless Tubing to Positioner & Air Filter Regulator (High Speed HD)

This assembly includes pneumatic actuator, positioner, air filter regulator, tubing, and the installation of orifice plates. Adding orifice plates to the positioner reduces hunting in smaller actuators sizes. These details are important, because they make the assembly more efficient and reduce maintenance.

Max-Air Technologysettembre 17, 2019

Non categorizzato

Dual Coil Solenoid w/ Junction Box for Wire Termination

Whether the reason is maintenance, safety, or aesthetics, a clean assembly is always ideal. Check out how this pneumatically automated flanged ball valve assembly incorporates a junction box for dual coil solenoid valve wire termination. Whatever the application, Max-Air is committed to providing the best…

Max-Air Technologysettembre 10, 2019

Non categorizzato

Tandem Assemblies That Defy Gravity!

Tandem assemblies that defy gravity! The bottom Delta T butterfly valve is direct mounted, while the top is mounted with a custom coupler and one of our MAB Cast Stainless Steel Brackets. Whatever the application, Max-Air is committed to providing a solution!

Max-Air Technologyagosto 9, 2019

Non categorizzato

Heat Dissipating Stem Extension Kit

High heat and electric actuators are usually not a good combination. Max-Air’s stem extension kit spaces the actuator away from the pipeline and a finned coupler provides higher surface area for increased heat dissipation.

Max-Air Technologygiugno 7, 2019

Non categorizzato

Fail Close Valve w/ Manual Override

This assembly features an MT Series spring return, fail closed actuator working in tandem with our GOW Series declutchable gear override. If you need to manually operate an automated valve during shutdown, maintenance, or emergency situations, a declutchable gear operator is the perfect way to…

Max-Air Technologymaggio 24, 2019

Non categorizzato

Fast Acting Butterfly Valve w/ Polished Stainless Disc

This is a fast acting butterfly valve assembly complete with polished disc! The MT actuators on these assemblies were modified for fast acting service. An additional exhaust port was made on top to allow for more air to quickly escape.

Max-Air Technologymaggio 17, 2019

Non categorizzato

1/2″ Ball Valve w/ Compact Actuator & Solenoid

Not all valves assemblies have to be large. We had some little valves with our smallest MT04 double acting actuators roll out of the shop. Our technicians did a great job putting these together. There were 20 assemblies with Namur mount solenoid valves. This was…

Max-Air Technologymaggio 17, 2019

Non categorizzato

Modulating Butterfly Valve Assemblies

These modulating butterfly valve assemblies are equipped with our MT rack and pinion actuators, explosion proof SMART positioners, and explosion proof solenoid valves for shutoff on loss of electrical signal. The are expertly mounted by our trained technicians and fully tested by our engineers.

Max-Air Technologymaggio 17, 2019

Non categorizzato

1.5″ Metal Seated Trunnions w/ High Temp Actuator for Power Industry

These custom & made to order 1.5" Sesto Metal Seated Trunnion Ball Valves are outfitted with our MT51 actuators. Set to fail close with high temp seals, this is a perfect compact solution for the power industry.

Max-Air Technologymaggio 17, 2019

Non categorizzato

Get Smaller & Simpler Solutions w/ Direct Mounting.

Not all assemblies need complex bracket and coupler solutions. When manufacturers make products to the ISO standards and ensure a direct mount pad, assembly can be quite simple! The solenoid valves have been terminated to our switches for easy field wiring.    

Max-Air Technologymaggio 17, 2019

Non categorizzato

1/2″ L-PORT Class 600 Sesto Ball Valves w/ Flame Proof Solenoids

Custom made Sesto Valves 1/2" L-PORT class 600 ball valves with Max-Air Actuators and Switches, accompanied by Asco valves. All are Flame Proof with Atex certification.

Max-Air Technologymaggio 17, 2019

Non categorizzato

Epoxy Coated MTs and Damper Valves

Our shop is always working on something new and exciting. This customer supplied us with damper valves for integration. We mounted our Epoxy Coated MT rack and pinion actuators and MS45 limit switches. The unique part of this job was, the end user wanted the…

Max-Air Technologymaggio 17, 2019

Non categorizzato

European Leverism

This integrated solution was engineered and manufactured at our world headquarters in Agrate Brianza, Italy.  The pneumatic control assembly was specifically designed to provide a stainless steel enclosed lever-mechanism coupling the electro-pneumatic positioner and the position indication limit switch box in tandem.  In addition, the…

Max-Air Technologymaggio 16, 2019

Non categorizzato

Corrosion Resistant Actuation for PVC Ball Valve

Technopolymer actuation for this PVC ball valve, complete with mounting bracket and solenoid valve. Our UT Technopolymer actuator is perfect for corrosion resistance. They are available in three sizes and are covered with up to 500 in-lbs of torque (Double–Acting).

Max-Air Technologyaprile 11, 2019

Non categorizzato

Flameproof 1/2″ 3-Pc Ball Valve Assembly

  These are two of the assemblies that went out today. Max-Air MT rack and pinions with our BE48 Atex approved switch and Asco Atex stainless steel solenoid valves with Exd stainless flameproof enclosures.

Max-Air Technologymarzo 28, 2019

Non categorizzato

MT Actuator with Low Temp Seals and Grease

  Pictured we have our MT actuators being optimized with low temp seals and grease in preparation for extreme cold service conditions. We have options for high temp to super low temp applications in stock per your request.

Max-Air Technologymarzo 21, 2019

Non categorizzato

Wellhead Choke Valve Assembly

Max-Air Technology had the good fortune to be selected as the actuator of choice by Equipment & Controls Inc., an Emerson Impact Partner located in Lawrence, PA, for a critical pressure reducing and secondary ESD (Emergency Shutdown) solution. The application utilizes a Cyclonic Choke Valve…

Max-Air Technologymarzo 5, 2019

Non categorizzato

Customer Partnering

Max Air partners with our customers in order to find THEIR ideal solution.  In this case, our customer specified a specific valve and actuator for the application.  We automated the assembly with custom brackets and our limit switch to provide the solution that the end…

Max-Air Technologyfebbraio 23, 2019

Non categorizzato

Fail-Safe Positioner w/ Speed Control

Customer supplied positioners were assembled & tested with Max-Air MT Series actuators. Stainless steel hard tubing provides corrosion resistance, durability and clean aesthetics. Max-Air CF3 NAMUR mount speed control blocks allows for speed adjustment in the field (for open and close directions).

Max-Air Technologygennaio 18, 2019

Non categorizzato

Turn-Key Automated Package w/ Override

Max-Air assembled & tested complete automated package, ready for valve mounting. Max-Air MT Series actuator, GOW Series declutchable gear operator, SV Series NAMUR solenoid valve and filter regulator are integrated together with a customer supplied limit switch box.

Max-Air Technologygennaio 18, 2019

Non categorizzato

Custom Scotch Yoke Actuators

Special project order with customer-specified paint finish and custom mounting and cylinder configurations. Max-Air HD Series scotch yoke actuators are versatile and customizable with a modular design, capable of operation with air, hydraulic fluid, or even water. Scotch yoke actuators can be a cost-effective and…

Max-Air Technologygennaio 16, 2019

Non categorizzato

Manual Override Assemblies

Max-Air Technology builds valve assemblies to suit customer needs. Pictured here is our MT series rack and pinion actuator with our GOW series declutch manual override direct mounted to ball valves. Our GOW series declutch gear operator is made to ISO standard, so mounting it…

Max-Air Technologygennaio 15, 2019

Non categorizzato

Electrically Actuated High Performance Butterfly Valves

These electrically actuated Delta T Products high performance butterfly valves, were integrated by Max-Air using another manufacturer’s electric actuator. Brackets and Couplings were manufactured by Max-Air and all units were tested, calibrated, and certified for the end user. Packaging with foam ensured safe delivery to…

Max-Air Technologygennaio 14, 2019

Non categorizzato

Custom Machined Couplers and Stainless Steel ISO 5211 Cast Brackets

JTNDaWZyYW1lJTIwd2lkdGglM0QlMjI1NjAlMjIlMjBoZWlnaHQlM0QlMjIzMTUlMjIlMjBzcmMlM0QlMjJodHRwcyUzQSUyRiUyRnd3dy55b3V0dWJlLmNvbSUyRmVtYmVkJTJGbGdTTkstXzRFc3MlMjIlMjBmcmFtZWJvcmRlciUzRCUyMjAlMjIlMjBhbGxvdyUzRCUyMmFjY2VsZXJvbWV0ZXIlM0IlMjBhdXRvcGxheSUzQiUyMGVuY3J5cHRlZC1tZWRpYSUzQiUyMGd5cm9zY29wZSUzQiUyMHBpY3R1cmUtaW4tcGljdHVyZSUyMiUyMGFsbG93ZnVsbHNjcmVlbiUzRSUzQyUyRmlmcmFtZSUzRQ== Max-Air Technology provides custom machined stainless steel pinions paired with ISO 5211 stainless steel cast brackets for all your automation needs. Contact for availability and distribution: Tel: +1 636 272 4934 Fax: 636.272.4937 Toll Free: 888.842.9998 Email: info@maxairtech.com

Max-Air Technologydicembre 28, 2018

Non categorizzato

Next Generation Electro-Hydraulic Actuator

Max-Air MT Series rack & pinion actuator outfitted with a custom electro-hydraulic power pack. The system is completely self-contained and ready for field wiring, includes manual handpump override and open/close feedback switches. Explosion proof or NEMA 4/4X options available for a variety of power and…

Max-Air Technologydicembre 12, 2018

Non categorizzato

Explosion Proof Modulating 2000 WOG V-Ball Assembly

This application may look a bit heavy for the top of a ½” 2000 WOG high pressure ball valve, but it was an extremely critical application requiring continuous modulation of a 30 degree v-ball along with position feedback by way of an explosion proof position…

Max-Air Technologynovembre 27, 2018

Non categorizzato

Modulating 3-Way Ball Valve, Explosion Proof

Max-Air scotch yoke SHD series actuator mounted to an 8” 3-way T-Port ball valve, explosion proof positioner incorporated with a volume booster for increase operational speed.

Max-Air Technologynovembre 14, 2018

Non categorizzato

Manual Gear Operated Ball Valve

Max-Air Gear operated manual ball valve, with Max-Air manufactured bracket and coupling, taking into account the packing configuration of the valve to allow for access for adjustments.

Max-Air Technologynovembre 9, 2018

Non categorizzato

Cost Effective High Performance

10” & 12” 850 Series Delta T Double Offset High Performance Butterfly valves outfitted with cost effective, corrosion resistant automation package. Max-Air “LockMesh” coated actuators are a cost effective alternative to stainless steel actuators, reducing cost and weight of the overall assembly. The GOW Series…

Max-Air Technologymaggio 10, 2018

Non categorizzato

Actuator w/ Accessory Bracket & Custom Tubing

Max-Air accessory mounting brackets allow for compact and organized mounting and tubing of non-NAMUR pneumatic accessories. As pictured, a custom SS inline solenoid valve is assembled to order with stainless tubing & fittings plus accessory bracket.

Max-Air Technologygennaio 31, 2018

Non categorizzato

Fail Closed 28” Lug DI BFV

Max-Air automated this 28” DI Lug Butterfly valve with our HD Series scotch yoke actuator, spring return fail closed.  Max-Air accessories were also included – MS48-120M03 explosion proof limit switch box and SV29-120VAC-3-STD explosion proof inline solenoid valve were pre-wired and terminated for a complete…

Max-Air Technologynovembre 10, 2017

Non categorizzato

Modulating Electric 3” Ball Valve

Max-Air AE Series modulating electric actuator is perfect for rotary control valve applications – particularly applications using butterfly valves, ball valves, and v-port ball valves.  Flexible input and output options (selectable 4-20mA, 0-10V), standard auxiliary switches, space heater & convenient LED open/close indication make setup…

Max-Air Technologyagosto 27, 2017

Non categorizzato

¾” Tandem Ball Valve Assembly

Max-Air designed this custom assembly setup to actuate two ball valves simultaneously with one actuator.  The valves operate opposite to each other, with one air to open/spring to close and the other air to close/spring to open.  Customer specified inductive proximity bolt type switches mount…

Max-Air Technologymaggio 27, 2017

Non categorizzato

3 Position 180° Dribble Control Package

Max-Air assembles and tests 3 position dribble control automation packages, ready to mount directly to an ISO mount standard 3-way T-port ball valve or other custom applications (with mounting kit adaption if necessary).  Max-Air stocks 180° and 90° actuators in double acting or spring return…

Max-Air Technologygennaio 27, 2017

Non categorizzato

SS Gear Operated Butterfly Valve

Max-Air designed and fabricated all stainless mounting kit uses our heavy duty MAB Series CF8 (304SS) cast bracket, custom stainless coupling and all stainless hardware to complete a match made in stainless heaven.  A 3" SS Butterfly valve is joined with a SS gear operator…

Max-Air Technologygennaio 20, 2017

Non categorizzato

Mirror Polish Actuator

Who is the fairest actuator of them all?  Not only does Max-Air stock a full line of stainless steel body rack and pinion actuators, we can also offer a mirror polish finish for extra-sensitive applications. Polished stainless steel is especially suitable for applications where bacteria…

Max-Air Technologygennaio 5, 2017

Non categorizzato

High Speed Testing

Performance Validation Montage | FPS = Frames per Second

Max-Air Technologydicembre 21, 2016

Non categorizzato

One-Stop Shop

Max-Air is more than just an actuator manufacturer or just another automation house.  We can provide complete, turn-key packages ready for service.  Specifications are usually driven by the valve, which is dictated by the process and environment.  We start from the “ground” (valve, process, environment)…

Max-Air Technologynovembre 18, 2016

Non categorizzato

Max-Air Hazloc Assemblies

Max-Air can provide a wide variety of accessories for safe operation in hazardous locations.  This fail safe ball valve assembly is equipped with an explosion proof limit switch and a 3-way solenoid valve that will allow it to fail SAFE under the most dangerous conditions.

Max-Air Technologynovembre 17, 2016

Non categorizzato

3” V-Port Ball Valve Assembly

A spring return fail close MT51.S4 actuator mounted to a 3” V-Port 150# flanged ball valve via stainless steel bracket and coupling.  The PEY01 positioner proportionally moves the position of the V-Port ball based on a 4-20mA input signal, providing accurate flow control.  Clean, dry…

Max-Air Technologynovembre 17, 2016

Non categorizzato

The Taming of the Trunnion

Max-Air SHD Series scotch yoke actuators sit perched atop beastly 8” Class 300 trunnion ball valves.  Strong and swift, these spring return actuators tame the intimidating ball valves and force the ball to the closed position when critical shutoff is required.  Complete with seamless mounting…

Max-Air Technologynovembre 16, 2016

Non categorizzato

Low Temp Buna Actuator

Max-Air debuts it’s new addition to our low temperature line-up: Low Temp Buna Seals!  We are now stocking Buna seals designed for low temperature applications down to -40°F, for cases where the standard low temp silicone seals are incompatible.  In this case study, the actuator…

Max-Air Technologysettembre 21, 2016

Non categorizzato

3-15 PSI Linear Positioner for Globe Valve [Video]

This setup uses a custom linear linkage kit with Max-Air’s PEY01 3-15 PSI pneumatic-pneumatic positioner to provide controlled linear actuation.  A linear double acting cylinder provides the power while a 3-15 PSI instrument air signal strokes the stem from 0 to 100 percent.  Max-Air assembled,…

Max-Air Technologymaggio 18, 2016

Non categorizzato

Damper actuator, fail in place plus manual override.

This damper mounted actuator assembly was built to specification for a power plant application where the customer needed fail “last position” operation of the damper.  Equipped with a dual coil 240 Vac solenoid valve for normal operation, this assembly also comes equipped with a full…

Max-Air Technologymaggio 9, 2016

Non categorizzato

Sanitary Grade Lock Out Kit.

Custom made lockout kits are nothing new to us here at Max-Air Technology. So when a customer requested a lockout kit to complement their sanitary butterfly valve, we didn’t hesitate to offer a solution. This kit was polished to match a valve with an external…

Max-Air Technologymaggio 9, 2016

Non categorizzato

Custom High Visibility Indicator

Max-Air has always helped customers with their valve indication needs. This latest includes a high visibility yellow extended tube with bright, reflective ends. This allows valve orientation to be checked from a great distance in low light environments.

Max-Air Technologyaprile 19, 2016

Non categorizzato

Automated Assembly w/ Custom Switches & Termination

This project consisted of ball valve & butterfly valve assemblies completed with a custom switch, indicator & special multi-pin din connector.  Max-Air actuators and mounting hardware were supplied to automate the valves, and the custom electronic feedback and communication was designed to meet specific customer…

Max-Air Technologyaprile 19, 2016

Non categorizzato

2” Modulating Fail-Safe Explosion Proof BFV

Max-Air Technology takes a humble 2” resilient seated butterfly valve and makes the most of it! Instead of a simple on/off shutoff device, this butterfly valve has been transformed into a fail-safe, explosion proof modulating control valve that can be controlled remotely via a 4-20mA…

Max-Air Technologyaprile 19, 2016

Non categorizzato

Explosion Proof Fail-Safe Actuation Package w/ Override

Max-Air’s MT71.S6.F16.CH36 spring return actuator offers fail-safe torque in a compact package compared to similarly sized scotch-yoke actuators.  This assembly is outfitted with a PEX02 model explosion proof positioner which provides 4-20mA modulating control and two limit switches for feedback.  A heavy duty filter regulator…

Max-Air Technologyaprile 19, 2016

Non categorizzato

2” Diverting On/Off Electric BFV Tee Assembly

Butterfly valve tee assemblies can be a good alternative to 3-way ball valves for diverting applications. In this case, two resilient seated butterfly valves are arranged to operate opposing each other (when one is open, the other is closed). Max-Air’s AE01-120VAC electric actuator supplies the…

Max-Air Technologyaprile 19, 2016

Non categorizzato

Fail Safe Ball Valve w/ Manual Override

Carbon steel ball valve actuated with an MT16.S4 spring return fail closed actuator for fail-safe operation.  Max-Air’s PV01-GOJ26 sandwich style declutch-able gear operator sits between the actuator and valve to allow for manual override when air pressure is lost.  Max-Air also fabricated a custom mounting…

Max-Air Technologyaprile 15, 2016

Non categorizzato

Automated PVDF Ball Valves

1-1/4” through 3” PVDF ball valves automated with Max-Air’s MT Series spring return actuators for fail-safe operation and Max-Air’s MS41 Series technopolymer limit switch boxes for open/close feedback.  Full stainless mounting kits were fabricated using our cast stainless MAB Series brackets and custom couplings.  All…

Max-Air Technologyaprile 14, 2016

Non categorizzato

Rotary Globe Control Valve Assembly

Rotary style globe control valves w/ v-notch can provide exceptional control within a compact package.  This assembly uses Max-Air’s MT17.DA actuator to open and close the customer supplied 1-1/2” valve.  An explosion proof PEX01 positioner provides 4-20mA control and is tubed up with SS tubing…

Max-Air Technologyfebbraio 4, 2016

Non categorizzato

Electric Ball Valves w/ SS Kits

Electric actuators are mounted to custom SS ball valves w/ Max-Air machined stainless steel mounting kits.  These assemblies were tagged with customer specified tag numbers.

Max-Air Technologyfebbraio 4, 2016

Non categorizzato

Handwheel Operated High Performance BFV

Max-Air GO Series handwheel gear operator sits atop a 3” high performance butterfly valve.  Sturdy design and low profile allow for tight installations.  Chainwheel operators are available, too!

Max-Air Technologyfebbraio 3, 2016

Non categorizzato

10” Electric BFV Tee Assembly

A modulating electric actuator is paired with 2 x 10” 051-262 Delta T lug butterfly valves, assembled in a tee linkage configuration that forces the 2nd valve to be closed when the 1st is open.  This configuration is common for mixing applications, and for many…

Max-Air Technologyfebbraio 3, 2016

Non categorizzato

Handwheel Operated Rotary Pinch Valve

Unique customer supplied 90° rotary pinch valve, assembled with Max-Air’s GO-03-ISO manual handwheel gear operator and custom Max-Air designed and machined mounting kit.

Max-Air Technologyfebbraio 3, 2016

Non categorizzato

Corrosion Resistant Automated Assemblies

This large custom project required consisted of dozens of assemblies, with all MT Series actuators epoxy coated for corrosion resistance.  Max-Air’s epoxy coating provides a cost effective way to achieve corrosion resistance and maintain a lighter assembly weight.  Solenoid valves and limit switches were prewired…

Max-Air Technologyfebbraio 3, 2016

Non categorizzato

Scotch Yoke Actuated Trunnion Ball Valve

A trunnion ball valve is assembled w/ Max-Air’s SHD series spring return scotch yoke actuator.  SHD/CHD series scotch yoke actuators are available with symmetric or canted yoke designs to provide a better match for your valve’s torque profile, and are available up to 2,700,000 in-lbs…

Max-Air Technologyfebbraio 2, 2016

Non categorizzato

DA Scotch Yoke Actuator w/ Extended Travel Stops

This Max-Air SHD series double acting scotch yoke actuator is equipped with custom extended travel stops to allow for travel adjustment beyond the standard + or - 6° in each direction.  These extended travel stops allow for infinite adjustment between 0° and 90°.  Also, a…

Max-Air Technologyfebbraio 2, 2016

Non categorizzato

Integrated Limit Switch & Solenoid Valve w/ Speed Control

Max-Air’s MT41 spring return actuator is outfitted with a customer provided limit switch/solenoid valve combo, nylon tubing & brass fittings make the air connection quick & easy.  An NPT1/4 plate and CF3 speed control plate w/ brass mufflers allow for stroke speed adjustment and quiet…

Max-Air Technologyfebbraio 2, 2016

Non categorizzato

Class 1 Div 1 Ball Valve Assembly

This assembly was assembled & tested to be compatible in Class 1 Div 1 rated hazardous environments.  A 3-way inline solenoid valve is nipple mounted to an MS48 explosion proof limit switch box and terminated, with SS tubing completing the air connection to the actuator…

Max-Air Technologyfebbraio 2, 2016

Non categorizzato

Modulating SS Ball Valve

Max-Air’s proven MT Series spring return actuator is mounted to a SS v-ball valve, assembled & tested w/ positioner for modulating flow control.

Max-Air Technologygennaio 21, 2016

Non categorizzato

Direct Mount Electric Ball Valve Assemblies

Max-Air’s AE Series electric actuators for on/off control easily direct mount to ISO5211 standard SS ball valves, making for quick and easy assembly and a compact package.  Max-Air offers top notch assembly & testing services.

Max-Air Technologygennaio 21, 2016

Non categorizzato

CS Ball Valve Assemblies w/ Cast SS Brackets

Max-Air’s MAB Series SS cast brackets are highlighted as part of some automated carbon steel ball valves.  The MT Series mounts to the ball valve with the ISO standard bolt circle patterns and a Max-Air machined custom coupler completes the connection.

Max-Air Technologygennaio 21, 2016

Non categorizzato

Low Profile Manual Limit Switch Kit

Max-Air’s 45 Series limit switch box is mounted to a SS handle operated ball valve w/ custom mounting kit, designed for easy installation, flexibility and a low profile.  The design allows for unhindered manual operation yet easy integration & field wiring.

Max-Air Technologygennaio 21, 2016

Non categorizzato

SS Actuator w/ Custom Knurled Pinion

This SS series actuator is outfitted with a super custom, knurled & extended SS pinion, engineered to provide reliable and long-lasting performance for the marine food industry.  The special knurls on the end of the pinion are used to automate the shucking process for oysters.

Max-Air Technologygennaio 21, 2016

Non categorizzato

Scotch Yoke Actuator w/ Rebreather

Max-Air’s HD series scotch yoke spring return actuator is outfitted with a rebreather kit that prevents outside air from entering the air chamber during the return stroke.  The actuator is epoxy coated for extra corrosion resistance and all non-coated rebreather components are stainless steel.

Max-Air Technologygennaio 21, 2016

Non categorizzato

Manual Ball Valves w/ XP Limit Switches

Limit switch on/off feedback is not limited to automated valves - even manual ball valves like these can be retrofitted w/ limit switches for normal or hazardous duty.  Max-Air’s manual limit switch kits are designed, fabricated & assembled in-house to provide flexible installation and durable…

Max-Air Technologyottobre 30, 2015

Non categorizzato

Automated 20” AWWA BFVs

This project was for multiple 20” AWWA butterfly valves, automated with Max-Air’s HD series scotch yoke double-acting actuators.  Custom mounting hardware was designed and fabricated in-house, and all assemblies were built and tested at Max-Air’s facility. 

Max-Air Technologyottobre 21, 2015

Non categorizzato

2-1/2” Diverting BFV Tee Assembly

A Max-Air AE Series electric on/off actuator sits perched atop a custom-fabricated diverting tee assembly.  The two Delta T lug butterfly valves are set opposed to each other so that when the primary valve is closed, the secondary valve is open and vice versa.  Unlike…

Max-Air Technologyottobre 21, 2015

Non categorizzato

10” Modulating Butterfly Valve

Max-Air’s AE Series electric actuator part number AEM06HA-120VAC-BMD/SPH/LED modulates via a 4-20mA (or 0-10V) input signal and includes a space heater, LED open/close indication, and a manual hand wheel override.  The valve being controlled is a 10” Delta T 051-482 butterfly valve w/ SS disc…

Max-Air Technologyottobre 21, 2015

Non categorizzato

High Temp Modulating 0-135 Ohm Actuated Ball Valve

A 1-1/2” 3-pc SS Ball Valve is outfitted with a modulating electric actuator that uses a 0-135 Ohm control signal to modulate the ball valve.  A heat dissipating coupler and extra tall bracket help minimize the heat conducted to the actuator from the process fluid.

Max-Air Technologyottobre 21, 2015

Non categorizzato

Modulating Fail-Freeze Ball Valve

Ball valves are not limited to on/off applications; for basic flow control a ball valve can be sufficient depending on your application.  The flanged ball valve is equipped with an explosion proof PEX01 4-20mA positioner, lock-up valve, filter regulator and SS tubing.  During normal operation,…

Max-Air Technologysettembre 23, 2015

Non categorizzato

Fail-Close Plastic Ball Valve w/ Speed Controls

  This plastic ball valve is equipped with an MT41.S4.F07-F10.CH22 spring-return actuator and MS41-21ST0T technopolymer limit switch.  To add some controllability to operating speed, a CF3 speed control plate w/ NPT ¼” adapter plate is mounted to the actuator’s Namur interface.  The CF3 speed control…

Max-Air Technologysettembre 23, 2015

Non categorizzato

Gear Operated BFV w/ 3 Foot Extension

This 12” lug body butterfly valve is manually operated with a hand wheel gearbox.  Instead of directly mounting the gear operator, a 3 foot stem extension is installed to allow access to the hand wheel when the valve is installed in a pit, near the…

Max-Air Technologysettembre 21, 2015

Non categorizzato

Modulating Fail-Close Assembly w/ Bypass

This custom high performance butterfly valve assembly operates normally as a modulating fail-close assembly.  As recommended, a filter regulator is used on the input air to the positioner to keep air clean and prevent pressure spikes, helping to extend the life of the positioner.  Using…

Max-Air Technologyluglio 30, 2015

Non categorizzato

Fast-Close Water Actuated Assembly

This custom automated assembly was designed to meet specific customer requirements, with all components carefully selected and tested to ensure the design benchmarks were met.  Instead of air or hydraulic fluid, high pressure water was used as the fluid power for this assembly.  Max-Air modified…

Max-Air Technologyluglio 30, 2015

Non categorizzato

Manual SS Butterfly Valves w/ Limit Switch Kits

As factories and the processes within grow more complex and dependent on real-time system feedback, many customers are increasingly requesting electrical feedback for open/close manual valves as well as automated valves. Every valve is different, so when Max-Air retrofits a handle-operated valve it is a…

Max-Air Technologyluglio 30, 2015

Non categorizzato

30” Double Offset High Performance

Max-Air SHD Scotch Yoke actuator fitted to a 30” double offset high performance butterfly valve. The new HD Series actuators come in a symmetric and canted torque curve configurations, and are designed with the new “Slide Block” technology for incredibly smooth, robust, and reliable performance.

Max-Air Technologymaggio 6, 2015

Non categorizzato

LockMesh or Stainless? “That IS the question”

This assembly utilizes our proprietary LockMesh coating on an MT series actuator to provide the end user with excellent chemical resistance at an affordable price compared to complete stainless actuators. The customer supplied limit switch with integral solenoid was mounted and plumbed at Max-Air Technology…

Max-Air Technologyaprile 30, 2015

Non categorizzato

Plastic Assemblies

Max-Air’s Technopolymer pneumatic actuator mounted to CPVC ball valves: Our Technopolymer rack and pinion actuator combined with these CPVC ball valves with FPM seals allowed the customer automated control of their high chlorine content water, without fear of corrosion.

Max-Air Technologyaprile 16, 2015

Non categorizzato

Jogging High Performance

This assembly was designed to provide a means of “jogging” and actuator position without the use of a positioner. Both solenoids are normally closed, one controls air coming in to the spring return actuator, one controls exhaust of air in the actuator. To open the…

Max-Air Technologyaprile 14, 2015

Non categorizzato

4-20mA Modulating Double-Acting Actuator

MT31.DA.F05-F07.CH17 double-acting actuator equipped with PEY02 positioner. The PEY02 positioner I/P converts a 4-20mA input signal to a controlled air supply output, diverting air to either the right or left ports of the actuator as needed to achieve the desired position. The PEY02 also includes…

Max-Air Technologyaprile 14, 2015

Non categorizzato

Heavy Duty Proximity Sensor

This application required that Max Air integrate a Turck sensor/switch with an auxiliary lead for solenoid valve operation via a single cable from the control panel. Note the adjustable puck and IP67 sealed multi pin connections throughout

Max-Air Technologyaprile 14, 2015

Non categorizzato

Highly Polished Disc 24” BFV

Application required a highly polished CF8M disc with an EPDM seat, designed for use in a vacuum freeze drying application, fitted with a Max-Air MT76 spring return pneumatic actuator. Bracket and coupling manufactured in house in O’Fallon, Missouri.

Max-Air Technologyaprile 14, 2015

Non categorizzato

4” Butterfly Valve Tee-Assembly

An MT46.S4.F07-F10.CH22 spring-return actuator actuates two 4” butterfly valves simultaneously via a mechanical tee-linkage assembly fabricated in-house by Max-Air. Two 4” lug style butterfly valves are mounted to a standard 4” ductile iron tee. Set up for a diverting application, fluid from the inlet of…

Max-Air Technologyaprile 14, 2015

Non categorizzato

Automated Industrial Basket Strainer

Max-Air custom designed solution where automation of an industrial basket strainer was required. Over time, basket strainers can be difficult to operate, and customer wanted a simplified and safe solution. Package used a Max-Air UT56 180° double acting pneumatic actuator, fitted with Max-Air speed controls…

Max-Air Technologyaprile 14, 2015

Non categorizzato

Lock Mesh Monster

Long ago in a land far far away, corrosion was a problem for aluminum actuators. With Max Air’s exclusive Lock Mesh coating, these same actuators can have the corrosion resistance of stainless with a fraction of the weight.

Max-Air Technologyaprile 14, 2015

Non categorizzato

Manual CS Ball Valve w/ Limit Switch

Handle-operated 4” flanged ball valve outfitted with an XAB Series limit switch box. Max-Air’s custom designed mounting kit allows for freedom to operate the handle while linking the valve stem to the limit switch box’s Namur shaft, providing open/close feedback. Manual limit switch kits are…

Max-Air Technologyaprile 14, 2015

Non categorizzato

Manual Gear OP with Limit Switch

This 10” High Performance Double Offset Butterfly Valve is operated by Max-Air’s GO series manual gearbox. What makes this one a little different is the customer’s request for an explosion proof limit switch. To allow for this, Max-Air’s diligent engineering team designed and built these…

Max-Air Technologyaprile 14, 2015

Non categorizzato

Complete Stainless Steel Package

Max-Air Technology stocks and ships daily, complete stainless steel automated packages. Shown is a Max-Air SS26 pneumatic actuator (316 SS), fitted with a Max-Air SSV86 stainless steel NAMUR mounted solenoid valve (316 SS) a Max-Air MS45-120703 stainless steel limit switch box (316 SS). Full stainless…

Max-Air Technologyaprile 14, 2015

Non categorizzato

Manual Plastic Ball Valve w/ Limit Switch

Handle-operated 4” flanged plastic ball valve outfitted with a CAB Series limit switch box. Max-Air’s custom designed mounting kit allows for freedom to operate the handle while linking the valve stem to the limit switch box’s Namur shaft, providing open/close feedback. Manual limit switch kits…

Max-Air Technologyaprile 14, 2015

Non categorizzato

Jogging High Performance

This assembly was designed to provide a means of “jogging” and actuator position without the use of a positioner. Both solenoids are normally closed, one controls air coming in to the spring return actuator, one controls exhaust of air in the actuator. To open the…

Max-Air Technologyaprile 14, 2015

Non categorizzato

Extended Travel Stop

Because of Max Air’s better than industry standard plus or minus 10 degrees of open and closed position adjustability, extended travel stops are rarely needed. When they are however, they can be provided and can be designed to stop the valve in almost any position.

Max-Air Technologyaprile 14, 2015

Non categorizzato

Great Things from a Small Package

This full port ½” 3pc SS valve assembly was to replace a low Cv solenoid. With our MT04 which is a mere 4 inches long and 2 inches wide, makes this assembly tiny, yet highly effective. Very few companies offer a pneumatic this small, and…

Max-Air Technologyaprile 14, 2015

Non categorizzato

4-20mA Modulating Fail-Freeze Double-Acting Actuator

MT26.DA.F05-F07.CH17 double-acting actuator equipped with PEY02 positioner & lock-up valve. The PEY02 positioner I/P converts a 4-20mA input signal to a controlled air supply output, diverting air to either the right or left ports of the actuator as needed to achieve the desired position. The…

Max-Air Technologyaprile 14, 2015

Non categorizzato

4-20mA Fail Freeze Double-Acting Actuator

This assembly is designed for modulating control of an air damper and additionally provides a “fail freeze” capability which will lock the double acting actuator and damper in position on loss of air or signal.

Max-Air Technologyaprile 14, 2015

Non categorizzato

Linear Assembly

That’s right! We might be famous for our rotary actuators, but we also assemble, test, and calibrate linear ones as well. This particular assembly uses a custom mounting kit with our PNY positioner for a customer supplied linear control valve.

Max-Air Technologyaprile 14, 2015

Non categorizzato

Smart Beacon

This MT16 actuator incorporates our Smart Beacon which uses an indicator with 4 way interchangeable metal targets and a proximity switch to sense valve position. This combination is great for intrinsically safe or hazardous environments.

Max-Air Technologyaprile 14, 2015

Non categorizzato

Special Seawater Application

Specially designed and manufactured Max-Air stainless steel actuator for use in an offshore platform. Actuator has been fitted with a Max-Air designed stainless steel high capacity flow block (HCFD) and ½” stainless steel external tubing, allowing the unit to be powered by seawater.

Max-Air Technologyaprile 14, 2015

Non categorizzato

Explosion Proof Electro-Hydraulic

Max Air’s line of electro-hydraulic actuators provide spring return ESD control in a variety of applications on valves with torques well beyond the limits of traditional electric spring return actuators. With accessories like modulating control, solar panels, and the like, the capabilities are dramatically extended.

Max-Air Technologyaprile 14, 2015

Non categorizzato

Dual Automated PVC Butterfly Valves

Max-Air MT41 double acting pneumatic actuator retrofitted to drive two PVC butterfly valves in alternating operation with one actuator (one valve is open while the opposite valve is closed). Brackets and couplings manufactured by Max-Air; full assembly and testing completed onsite, shipped with foam-in-place packaging.

Max-Air Technologyaprile 14, 2015

Non categorizzato

Chain Wheel Operated Ball Valve w/ Limit Switch

3” Plastic ball valve assembled with chain wheel gear operator and manual limit switch kit. Chain wheel allows operation from the floor level with assembly suspended above, while the limit switch box provides open/close feedback to a control room or panel.

Max-Air Technologyaprile 14, 2015

Non categorizzato

Heat Dissipating Mounting Kit

This unique assembly is used in a boiler feed water application where line temps can easily exceed 210 degrees Fahrenheit. Our special in-house designed heat dissipating mounting kit keeps the actuator safe from the heat while maintaining a small package.

Max-Air Technologyaprile 14, 2015

Non categorizzato

Tank Bottom Application

An MT41.S4.F07-F10.CH22 spring-return actuator mounted with an extra-long stem extension to a SS ball valve with special tank bottom end connection. The long stem extension provides clearance for the actuator from the bottom of the tank. The spring-return fail close actuator provides fail-safe tank shutoff…

Max-Air Technologyaprile 14, 2015

Non categorizzato

Direct Mount BFV Assembly

Max-Air integrated butterfly valve assembly, direct mount configuration, fitted with an MT17 spring return actuator, an SV61-120 VAC solenoid valve, and a NEMA 4/4X MS45-120M03 limit switch. Solenoid valve is prewired and terminated inside of the limit switch; this provides for power and signal wires…

Max-Air Technologyaprile 14, 2015

Non categorizzato

Integrated IFM Plug-&-Play ASi Switch w/ Solenoid Valve

MT26.DA.F05-F07.CH17 double-acting actuator with IFM Plug-&-Play ASi proximity switch, smart beacon & pre-terminated solenoid valve. Max-Air’s customizable smart beacon provides targets to trip the IFM switch in the open and closed positions. The SV61-24VDC-ASI solenoid valve coil uses a 24VDC power signal for ASi compatibility…

Max-Air Technologyaprile 14, 2015

Non categorizzato

Roomy Junction Box

This actuator system was assembled for ease of wiring in a hazardous environment. Using a solenoid valve with a roomy junction box, all of the connections for switches and the solenoid are made simple for field electricians.

Max-Air Technologyaprile 14, 2015

Non categorizzato

Direct Mount Electric Assembly

Max-Air AE Series fast acting electric actuator direct mounted to a 3-piece stainless steel ball valve. This assembly replaced a low Cv solenoid valve with a full port ball valve, and provided the customer with a much better solution providing excellent flow while maintaining the…

Max-Air Technologyaprile 9, 2015