Skip to main content

MT Series

Rack & Pinion Actuator
Aluminum

Try Our Proprietary LockMesh® Coating!

LockMesh® has been shown to provide a cost effective compromise. It provides the chemical resistance of PTFE along with the durability of a stainless steel base layer. Click here for more info!

1610476124451
1610476124451
Screen Shot 2021-03-22 at 8.53.58 AM
Screen Shot 2021-03-22 at 8.53.58 AM
1610476124440
1610476124440

MT Series | Aluminum
Rack & Pinion

Finish Options in Epoxy, & LockMesh,
& Electroless Nickel Plating (ENP)

  • Compact Rack and Pinion Design
  • 3D Models Available for All 17 Sizes
  • Direct ISO 5211 Standard Valve Mounting
  • Direct NAMUR Accessory Mounting
  • Anti-Blowout Bi-Directional Pinion Retention
  • High Visibility Open/Closed Beacon
  • Pre-Loaded Spring Cartridges
  • Double-Acting (Air-to-Air) Operation
  • Spring-Return (Air-to-Spring), Fail-Close or Fail-Open
  • Standard (CCW open) or Reverse (CW open) Rotation
  • Patented Dual Travel Stop Design ±10° Adjustment
  • Designed for High Cycles 1,000,000+
  • Unlimited Cycle Life Warranty

Options

  • Female Double-D and Keyed Pinions
  • T-Port & L-Port indicators for multiport applications
  • Extended travel stops for greater stroke adjustment
  • ENP, Polyamide Epoxy, & LockMesh™ coatings
  • Alternative Operating Media (Water, Oil, Inert Gas)
  • High and Low Temperature Options
  • Fast Open / Fast Close Options

Technical Videos

(Click on the image below to open and view the specific technical video you need.)

15 2

YouTube Video UExSelBPX28zNmI1SC1vQ2ZzaUxURjBHRnk0Qm44Q0hHNS4wOTA3OTZBNzVEMTUzOTMy

Convert Max-Air Rack & Pinion Actuator from Fail Close to Fail Open or from Fail Open to Fail Close

Max-Air Technology August 31, 2023 2:15 am

This tutorial covers the basics of adjusting the open & close travel stops on MT Series actuators. For more information, visit www.maxairtech.com/

This tutorial covers the basics of adjusting the open & close travel stops on MT Series actuators.

For more information, visit www.maxairtech.com/

7 0

YouTube Video UExSelBPX28zNmI1SC1vQ2ZzaUxURjBHRnk0Qm44Q0hHNS4yODlGNEE0NkRGMEEzMEQy

MT Series – Travel Stop Adjustment Tutorial

Max-Air Technology November 3, 2022 6:42 pm

This tutorial covers the basics of setting the supply pressure on a standard air filter regulator. For more information, visit www.maxairtech.com/

This tutorial covers the basics of setting the supply pressure on a standard air filter regulator.

For more information, visit www.maxairtech.com/

1 0

YouTube Video UExSelBPX28zNmI1SC1vQ2ZzaUxURjBHRnk0Qm44Q0hHNS41MjE1MkI0OTQ2QzJGNzNG

Air Controls – Air Filter Regulators Tutorial

Max-Air Technology November 3, 2022 6:42 pm

Recently, we had the opportunity to photograph one of our LockMesh® Coated Actuators after 2 years of service. This unit comes from a prominent salt mining and processing company. They have had great success using our LockMesh® Coated Actuators. With several hundred units installed, they have specified our coated actuators for all future projects. This is a significant cost savings for them when compared to the alternatives of stainless steel actuators or replacing standard aluminum actuators every few months. More info on our LockMesh® Coating: https://www.maxairtech.com/literature/04-FeatureFocus/00-Max-Air_FeatureFocus_LockMesh.PDF Max-Air is proud to offer our advanced coating system, LockMesh®. This hybrid coating system combines the rugged toughness of a stainless steel base coating with the corrosion resistance of PTFE. Corrosive environment applications such as marine areas, caustic wash down, submerged service, and direct chemical exposure require equipment with enhanced corrosion resistance. Frequently the common options are plating, painting, or a change to stainless steel construction. All of these can be effective in some applications; however, they do have limitations and in some cases carry a significant weight and/or cost impact. LockMesh® has been shown to provide a cost effective compromise. It provides the chemical resistance of PTFE along with the durability enhancement of a stainless steel base layer.

Recently, we had the opportunity to photograph one of our LockMesh® Coated Actuators after 2 years of service. This unit comes from a prominent salt mining and processing company. They have had great success using our LockMesh® Coated Actuators. With several hundred units installed, they have specified our coated actuators for all future projects. This is a significant cost savings for them when compared to the alternatives of stainless steel actuators or replacing standard aluminum actuators every few months.

More info on our LockMesh® Coating:
https://www.maxairtech.com/literature/04-FeatureFocus/00-Max-Air_FeatureFocus_LockMesh.PDF

Max-Air is proud to offer our advanced coating system, LockMesh®.
This hybrid coating system combines the rugged toughness of a stainless
steel base coating with the corrosion resistance of PTFE.

Corrosive environment applications such as marine areas, caustic
wash down, submerged service, and direct chemical exposure require
equipment with enhanced corrosion resistance. Frequently the common
options are plating, painting, or a change to stainless steel construction.
All of these can be effective in some applications; however, they do have
limitations and in some cases carry a significant weight and/or cost
impact.

LockMesh® has been shown to provide a cost effective compromise.
It provides the chemical resistance of PTFE along with the durability
enhancement of a stainless steel base layer.

0 0

YouTube Video UExSelBPX28zNmI1SC1vQ2ZzaUxURjBHRnk0Qm44Q0hHNS4wMTcyMDhGQUE4NTIzM0Y5

LockMesh Coating for Rack & Pinion Actuators | Exclusively from Max-Air Technology

Max-Air Technology July 30, 2021 7:20 pm

Load More... Subscribe

Data Sheets

(Navigate to the file needed & click open or download.)

IOM Manuals

(Navigate to the file needed & click open or download.)

3D CAD Models

(Navigate to the file needed & click open or download.)

Check out these Case Studies!

Forged 3-Way Trunnion Sesto Ball Valve w/ Max-Air Pneumatic Automation & Explosion Proof Termination, Limit Switch, & Solenoid Valve Case StudiesLimit SwitchesMT SeriesSesto Forged
August 26, 2024

Forged 3-Way Trunnion Sesto Ball Valve w/ Max-Air Pneumatic Automation & Explosion Proof Termination, Limit Switch, & Solenoid Valve

This entire assembly was provided by the brands of Max-Air Technology. The Metal Seated, Forged Stainless Steel, Class 300, L-Port, 3-Way Floating Sesto Ball Valve is being automated by our MT Series Rack & Pinion w/ Explosion Proof Solenoid, Limit Switch Box, and Termination.
Max-Air Technology
Love0
Direct Mount Delta T Butterfly Valve w/ Max-Air Actuator & Limit Switch 050/051 SeriesCase StudiesLimit SwitchesMT SeriesSolenoid Valves
May 15, 2024

Direct Mount Delta T Butterfly Valve w/ Max-Air Actuator & Limit Switch

This is a common full solution assembly, our Delta T Resilient Butterfly Valve w/ MT Rack & Pinion Actuator, Solenoid, Limit Switch, & Termination. Assemblies like these are assembled from stock. Assembly and Termination is done in-house by our world class technicians, and the butterfly…
Max-Air Technology
Love0
Plastic Ball Valves w/ Solenoid, Limit Switch Boxes, Termination, & Actuators in Both Aluminum and Technopolymer Case StudiesLimit SwitchesMT SeriesSolenoid ValvesUT Tech Series
October 13, 2023

Plastic Ball Valves w/ Solenoid, Limit Switch Boxes, Termination, & Actuators in Both Aluminum and Technopolymer

The Max-Air line of technopolymer actuators are designed to withstand the most extreme environments (Hydrocarbons, Organic Solvents, and Fuels)! Pictured below is our UT Tech Series Actuator on some plastic ball valves with 45 Series Limit Switch Boxes and Termination.
Max-Air Technology
Love0
Direct Mount Resilient Seated Butterfly Valve w/ MT Series Rack & Pinion Actuator 050/051 SeriesCase StudiesMT Series
October 13, 2023

Direct Mount Resilient Seated Butterfly Valve w/ MT Series Rack & Pinion Actuator

These direct mount Delta T Valves Resilient Seated Butterflies are being automated with our MT Series Rack & Pinion Pneumatic Actuators! Our commitment to offering direct mount solutions, in as many situations as possible, creates solutions like these. A simple, quality, and competitive package like…
Max-Air Technology
Love0
Sesto Segmented Ball Valves w/ Rack & Pinion Actuators, Positioners, Air Filter Regulators, & Stainless Tubing Case StudiesMT SeriesMV1F SeriesPositioners
January 13, 2023

Sesto Segmented Ball Valves w/ Rack & Pinion Actuators, Positioners, Air Filter Regulators, & Stainless Tubing

Shipments like these show just how complete of an assembly Max-Air Technology can provide! Pictured here are two different sized Sesto Valves Segmented Ball Valves automated with MT Series Rack & Pinion Actuators. They shipped complete with the Positioners, Air Filter Regulators, and Stainless Tubing. All items…
Max-Air Technology
Love0